MasterBurner - PIC Cards
On this page I will show you how to program an PIC type card (in this case a Goldcard) with MasterBurner.
It is really very easy.
From the pull down menu on the right, select the Goldwafer.
Now you click on the Load Program Memory icon to load the flash file.
Select the PIC file you want to program.
Now you click on the Load Eeprom Memory icon to load the flash file.
Select the Eeprom file you want to program.
Please check that the box "EEPROM Data" is checked now.
This should be done automatically upon loading the Eeprom file.
Also check the configuration settings:
- Oscillator = RC
- WDT ticked
- PWRTE open
- CP open
I have said this often on this site, and I will say it again: it is good custom to always erase your card before you program it.
So press the Erase Card icon.
Now to start programming your card, you just press the Write Card icon.
You will seen a timeline at the bottom of the screen, displaying the progress of the individual stages of the programming process.
That's it.
All you have to do now, is wait until the process is finished.